Kitchen Tap / Pull-Out Mixer / Linear Buster+Punch

A single lever kitchen tap with pull-out mixer that mixes water from the hot and cold pipes in your kitchen. This tap has been cast, sand-blasted and machined from solid metal in Italy. It features our signature linear-knurl pattern and is refined by hand. Available in four metal finishes: steel, brass, gun metal and welders black.

▪ Maximum thickness of mounting surface 70mm, with supplied fixings.

▪ Minimum recommended water pressure: 10.2 PSI (0.7 BAR)

▪ Maximum recommended water pressure: 72 PSI (5 BAR)

▪ Recommended maximum hot water temperature: 70°C (158°F)

▪ Recommended temperature range: 5 – 60°C (41 – 140°F) Note: exceeding these temperatures or water pressures can result in damage to the tap. A pressure reducing valve may be required to be fitted in high water pressure situations. All Buster + Punch mixer taps conform to standard EN817. In some cases, local housing regulations may require mixer taps to be of a higher minimum water pressure standard. In this instance we would recommend consulting with a certified plumber about installing a pressure regular or similar device.  All Buster + Punch mixer taps conform to standard EN817. In some cases, local housing regulations may require mixer taps to be of a higher minimum water pressure standard. In this instance we would recommend consulting with a certified plumber about installing a pressure regulator or similar device. Mixer taps are tested to work with a max. pressure of 10 bar (1000 kPa) and recommended working pressure range is 0.7 – 5.0 bar (70 kPa – 500 kPa). images shown are for illustration purposes only.